DEC Modena – TRACTOVEP M
- Chassis: Steel arc welded sheet forming a rigid load-bearing structure. The special configurations allows for high accessibility to components. The disposal of the components, the battery on the rear axle and the front traction-steering unit make very stable machine.
- The rear axle is provided, in the model SE-SM, with a suspension for a better comfort of the driver.
- Traction unit: It is composed of an oil-filled reduction gear and it is moved by a powerful motor, A.C. type in the model SE-SM. It is connected to the frame by a ball-bearing fifth wheel of big dimensions.
- The traction unit have the motor assembled vertically for a better ventilation and protection against Impacts and dirt.
- Braking: The machine is normally braked by the electronic system which acts the motor and slackens its speed when the accelerator is released. A higher reverse current braking is always possible by means of the chopper. A negative solenoid brake acts as safety and parking brake. In the model SE and SM an hydraulic system, moved by a pedal , acts on the rear wheels.
- Drive piace: It is created to ensure the comfort for a half-sitting operator; its base is very low, allowing to go up/down continually and comfortable. In the model with manual steering, the driver use a tiller while in the model with electric steering, the operator use a small steer. In both the machines the direction and the speed are obtained by drive throttles.
- The desk board Nave a battery discharge indicator that show hours of work and eventually faults. There are then the start key, the tight switch and the horn button.
- Electric system: Mainly composed of an electronic control , D.C. for the 2Tons machines and A.C for the bigger models, which guarantees the machine power at low speed, a good maximum speed, the movement control, the regenerative braking and the counter current brake.
- Wheels: They are, in reference to the type of the machine, of big dimensions. Covered by polyurethane or rubber.
- Safety devices: The machines complies with the effective standards with respect to components, performances and stability.
TECHNICAL DATA
DIMENSIONS
PERFORMANCE
TRANSMISSION
PROPULSION
